Ekomat 100W/m²
Single-side power supply

Ekomat Heating Mats are ready to install heating elements which are produced in accordance with EN 60335-2-96.

Typical use:
The mats of 100W/m2 power can be installed under any floor type.

Everywhere - in new building projects or renovations it is especially useful in renovated kitchens, bathrooms, anterooms, halls... as raising the floor level is kept to a minimum on any base: on concrete floors, on existing(old) ceramic tiles, terrazzo, moisture – proof chipboards

What kind of floor finishes are compatible Ekomat with?
– in general, ceramic, porcelain and natural stone floor tiles, which provide optimal heat transmission;
- wooden mosaic, oak parquet or laminated floor panels, carpet (check compatibility) vinyl (check compatibility).

The package contains:
Thin self-adhesive heating mat
Installation pipe for the temperature sensor
Instruction manual

Technical data:
Power output: 100W/m²
Power supply: 230 V ~ 50/60 Hz
Mat thickness: ~ 3.9 mm
Min. installation temperature: -5^oC
Max. working temperature: +80^oC
Conduit cables: 1 x 4 m; 3 x 1.00 mm²
Type of heating cable: double-core of diameter ~ 3.4 mm, conductor screen, single-side power supply
Power output of heating cable: ~ 7 W/m
Insulation: double layer, FEP + XLPE
Outer sheath: XLPE
Rated power output tolerance: +5%, -10%
Min. radius of bending cable: 5 D
Protection: IPX7
Product certificates: VDE, GOST-R
Certificate of ISO 9001: IQNET, PCBC
Product mark: CE